Advertisement
HomeIndustry ReleasesBendix Tech Tips: Protecting Current Technologies with a High-Quality Air Supply

Bendix Tech Tips: Protecting Current Technologies with a High-Quality Air Supply

ELYRIA, Ohio — With the increasing adoption of Automated Manual Transmissions (AMTs) and advanced safety technologies supported by electronically controlled braking systems, protecting a commercial vehicle’s air system performance has never been more important.

Many AMTs on the market utilize a mechatronic shifter, which combines the intelligence of electronic controls with the reliability and high power density of pneumatics. The compressed air to control these AMTs is supplied by the engine’s existing air compressor. Furthermore, most automated air controls on trucks utilize multiple electronically operated solenoids, which require both cleaner and dryer air than traditional manual brake valves, and are sensitive to both small particulate and oil contamination.

As part of its Bendix Tech Tips series, Bendix Commercial Vehicle Systems, LLC. offers maintenance insight on protecting these systems by recognizing and addressing air quality issues.

Poor Air Quality: Know the Signs

Early indicators of poor air quality can occur downstream of the compressor and air dryer, in the systems that rely on effective functioning of components such as solenoid valves for pneumatic automation and emissions controls.

“These components have very tight tolerances, and if there’s too much of that ‘toxic brew’ of contaminants, engine oil and water, it leads to mechanical malfunctions due to fouling within valves, for example,” said Richard Nagel, Bendix director of marketing and customer solutions, Air Charging. “That’s actually how many customers first realize there’s a problem with the air system: Drivers will report noticeable performance changes, like malfunctioning brake valves or an AMT not engaging or operating as smoothly as expected.”

Other signs include an excess of oil mixed with water found when regularly draining the air system tanks, and the need to replace air dryer cartridges more frequently than expected.

What steps can you take to address an air contamination issue? From a practical standpoint, the two key points within the air system for controlling air quality are the compressor and the air dryer.

Compressor Ins and Outs

Every compressor is designed to pass a small amount of oil in order to lubricate the piston. Depending on the compressor’s design and other factors—including duty cycle, operating temperature, age, and whether the engine is turbocharged—the amount of oil passed through can vary widely. Even a high-quality, brand-new compressor can pass a significant amount of oil per year, and poorly rebuilt compressors run the risk of passing even more.

When oil passes around the compressor piston, it mixes with moisture drawn into the engine through the truck’s air intake system, creating the potential for emulsions to build up in the air system. A compressor passing too much oil with elevated ambient temperatures can result in carbon buildup in its unloading valves, resulting in a malfunction of the unloading system. The oil and water mixture can also restrict the air passage in the discharge line.

“If the compressor is passing too much oil, you can replace the head or the unloader valves, or replace the entire compressor with a new or remanufactured unit,” Nagel said. “But it’s like anything else: If you work a compressor hard, over the years, that piston-to-bore clearance gets wider, and more oil is going to get through. That’s where the capability of the air dryer comes in.”

Dryer Importance

Standard air dryers utilize an adsorption process to bind the moisture in the air to a dessicant during the charge cycle, and exhaust air mixed with water during the regeneration or purge cycle. Clean dessicant has a potential life of millions of charge cycles, if it remains uncontaminated.

Oil that passes through the compressor, however, can foul the dessicant, preventing the dryer from operating as efficiently and effectively as it should. Bendix recommends using oil-coalescing dryer cartridges, which include an additional filter that extracts the oil from the air and collects it in the cartridge sump, where it is exhausted during the purge cycle. (The Bendix PuraGuard design actually removes oil from the air before reaching the desiccant, which also extends the dryer’s capability.)

If a truck manufacturer specifies an oil-coalescing cartridge to protect an AMT or other system, it’s even more important to stick with an oil-coalescing replacement, since using a standard cartridge would leave those components vulnerable to higher levels of contamination. Repairing a system affected or damaged by contaminated air can cost multiple times the added expense of an oil-coalescing cartridge.

Biannual air dryer cartridge replacement is often suitable, but air system quality may depend on more frequent changes, depending on the vehicle’s design, usage, and operating environment. Running the compressor harder means consuming more air and increasing the system’s number of cycles, so vehicles with multiple axles, or vocational vehicles like gravel haulers, will have higher air consumption rates than an over-the-road truck running cross-country.

“For a long time, the design of many valves and other components in the truck’s air supply remained relatively unchanged, with internal clearances designed to operate under higher levels of contamination,” Nagel said. “Today, trucks often have more complex pneumatic systems which are more mission-critical—placing even more importance on maintaining the quality of the air they use to operate.”

Information in the Bendix Tech Tips series, along with instructional videos and interactive training on foundation drum brakes and friction, can be found at the Bendix On-Line Brake School, www.brake-school.com. For more information on matching friction selection to application, contact the Bendix Tech Team at 800-AIR-BRAKE.

About the Bendix Tech Tips Series

Bendix, the North American leader in the development and manufacture of leading-edge active safety and braking system technologies, is committed to helping keep commercial vehicles on the road and in good working condition. The Bendix Tech Tips series addresses common commercial vehicle maintenance questions and issues concerning the total range of components found within foundation and air brake systems, as well as advanced safety systems.

About Bendix Commercial Vehicle Systems, LLC.

Bendix Commercial Vehicle Systems, a member of the Knorr-Bremse Group, develops and supplies leading-edge active safety technologies, energy management solutions, and air brake charging and control systems and components under the Bendix brand name for medium- and heavy-duty trucks, tractors, trailers, buses, and other commercial vehicles throughout North America. An industry pioneer, employing more than 3,000 people, Bendix is driven to deliver solutions for improved vehicle safety, performance, and overall operating cost.

Bendix is headquartered in Elyria, Ohio, with manufacturing plants in Bowling Green, Kentucky; Huntington, Indiana; North Aurora, Illinois; and Acuña, Mexico. For more information, call 800-AIR-BRAKE (800-247-2725) or visit www.bendix.com. To learn more about career opportunities at Bendix, visit www.bendix.com/careers. Follow Bendix on Twitter at http://twitter.com/Bendix_CVS. Log on and learn from the Bendix experts at www.brake-school.com.

Advertisement

July 2024

Learn more about the STN 2024 Innovator of the Year, Dr. Pallav Prakash, director of electrification program management for...
Advertisement

Buyer’s Guide 2024

Find the latest vehicle production data and budget reports, industry trends, and contact information for state, national and federal...
Advertisement

Poll

Have you attended a professional development conference or training this summer?
89 votes
VoteResults
Advertisement